A tile backsplash in your kitchen can make the room feel warm and inviting. Laying a tile backsplash takes some time and patience, but it's well worth the effort. Doing it yourself helps save money too. Here's how to lay a tile backsplash:
Instructions
- 1
If your kitchen tile backsplash is currently painted drywall, the job is easy! All you have to do is sand the drywall surface and you're ready to lay backsplash tile (sanding the drywall creates a rough surface that the tile will adhere strongly to). If you have an existing backsplash, remove all tile with a chisel and sand the drywall so it is smooth.
2Find the center of the backsplash wall and measure where you want to lay the tile. Use a pencil to mark vertical and horizontal lines where appropriate. You want the tile size to be consistent at each end point.
3Remove the stove hood, switches, light switch plates and any other obstacle that will be in your way for backsplash tiling. Also be sure to unplug or turn off kitchen electrical outlets and appliances before you begin.
4Apply the tile adhesive to the wall with the notched trowel, starting at the bottom middle of the backsplash area where the tile will go. Set the backsplash tiles into the adhesive and place the spacers in-between each as you go. Be sure to give each tile a slight twist to ensure a good bond with the adhesive. Cut the backsplash tiles as needed to fit the ends. You can also use sandpaper to smooth out the tile edges if they are sharp after you cut them. Don't forget to leave space for caulking near the counter and other edges.
5Let the backsplash tiles set in the adhesive overnight.
6Remove the tile spacers and mix the grout according to the manufacturer's directions.
7Using the rubber float, apply the grout to the kitchen backsplash tile at a 45 degree angle. Wipe off excess grout with a wet sponge.
8After about an hour, check for grout haze on the kitchen backsplash tiles and wipe them clean as needed.
9Seal the corners around the kitchen backsplash tile with caulk (be sure to use a mildew resistant caulk).
10Apply a silicone grout sealer over the backsplash grout after a week (it takes about a week for the backsplash tile to 'cure'). The sealer will keep food stains from seaping into your grout.
11See the Resources listed below for more tiling ideas.
No comments:
Post a Comment